A
-
Abbasi, Mahmoud
The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
-
Abdollahi Azghan, Mehdi
Investigation the interface and charpy impact behavior of fiber metal laminates containing graphene nanoplatelets and glass kevlar hybrid fibers [Volume 6, Issue 2, 2019, Pages 10-19]
-
Abedi, Seyed Morteza
Experimental and Numerical Study of Double Y-Shaped Hydroforming Using Analysis of Variance Method [Volume 6, Issue 7, 2019, Pages 34-41]
-
Abootorabi, Mohammad Mahdi
Investigation of tool and workpiece clamping effect on stability lobes in milling process [Volume 6, Issue 6, 2019, Pages 12-24]
-
Afshari, Davood
Investigating the effect of material properties on simulation of Mg alloy resistance spot welding process [Volume 6, Issue 1, 2019, Pages 53-60]
-
Afshari, Davood
Investigation the effect of bobbin tool geometry in friction stir welding of aluminum alloy 6061-T6 [Volume 6, Issue 4, 2019, Pages 1-6]
-
Aghajani Derazkola, Hamed
Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper [Volume 6, Issue 1, 2019, Pages 32-41]
-
Ahari, Alireza
Fabrication of two layer Al/Cu rods using hot forward extrusion [Volume 6, Issue 4, 2019, Pages 7-13]
-
Ahmadi, Hamed
Experimental and numerical investigation on crushing of metal-composite hybrid energy absorber under a quasi-static loading [Volume 6, Issue 8, 2020, Pages 54-66]
-
Akbari, Javad
An experimental and numerical study of tool geometry effect on microfracture characteristics in micro/nano machining of brittle porous structure [Volume 6, Issue 5, 2019, Pages 47-52]
-
Amadeh, Ahmad Ali
The study of raw materials type on condition and production mechanism of nanocrystalline Zr-based MAX-phases [Volume 6, Issue 4, 2019, Pages 23-28]
-
Ansari, Mohammad Javad
Manufacture and Comparison of Mechanical Properties of Reinforced Polypropylene Nanocomposite with Carbon Fibers and Calcium Carbonate Nanoparticles [Volume 6, Issue 5, 2019, Pages 1-12]
-
Ashrafi, Amir
Experimental and Numerical Study of Double Y-Shaped Hydroforming Using Analysis of Variance Method [Volume 6, Issue 7, 2019, Pages 34-41]
-
Azad, Masoud
Manufacturing and characterization of copper nano particles by ultrasonic-assisted electrical discharge machining [Volume 6, Issue 1, 2019, Pages 24-31]
-
Azarhoushang, Bahman
Investigation of machining behavior of Polyether Ether Ketone in Single grit scratch test [Volume 6, Issue 9, 2020, Pages 54-62]
B
-
Baharvandi, Hamid Reza
The study of raw materials type on condition and production mechanism of nanocrystalline Zr-based MAX-phases [Volume 6, Issue 4, 2019, Pages 23-28]
-
Bakhshi Jooybari, Mohammad
Experimental investigation of formability of laser tailor welded steel blanks in single point incremental forming [Volume 6, Issue 6, 2019, Pages 25-33]
-
Barsoum, Zuheir
Investigating the effect of material properties on simulation of Mg alloy resistance spot welding process [Volume 6, Issue 1, 2019, Pages 53-60]
-
Behzadnasab, Morteza
Optimization of Physical-Mechanical Properties of light cure Resins for use in 3D printing by micro and nano additives for industrial applications [Volume 6, Issue 8, 2020, Pages 33-42]
D
-
Davoodi, Behnam
Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]
E
-
Eisaabadi Bozcheloei, Javad
Experimental study of the effect of temperature on mechanical properties of aluminum sheets produced by equal channel angular rolling process [Volume 6, Issue 9, 2020, Pages 13-24]
-
Elyasi, Majid
Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper [Volume 6, Issue 1, 2019, Pages 32-41]
-
Elyasi, Majid
The effect of surface shape on the production of aluminum-copper two layer tubes using forward extusion process [Volume 6, Issue 8, 2020, Pages 1-9]
-
Emami, Mohsen
Study of the performance of minimum quantity lubrication (MQL) and type of lubricant in the milling process of stainless steel EN 1.4903 [Volume 6, Issue 3, 2019, Pages 28-42]
F
-
Fadaei Tehrani, Alireza
Manufacturing and characterization of copper nano particles by ultrasonic-assisted electrical discharge machining [Volume 6, Issue 1, 2019, Pages 24-31]
-
Faghani, Gholamreza
Application of pre-heating in the reduction of distortion in the dissimilar joints welding SS type 304 and carbon steel A106-B [Volume 6, Issue 6, 2019, Pages 51-63]
-
Fatemeh, Barandar
The effect of surface shape on the production of aluminum-copper two layer tubes using forward extusion process [Volume 6, Issue 8, 2020, Pages 1-9]
-
Fatemi, Seyed Alireza
Study of damage in CFRP and GFRP composite in drilling [Volume 6, Issue 6, 2019, Pages 44-50]
G
-
Ghadimi, Morteza
The study of raw materials type on condition and production mechanism of nanocrystalline Zr-based MAX-phases [Volume 6, Issue 4, 2019, Pages 23-28]
-
Ghaneifar, Afshin
Designing and manufacturing of functional diffusive machine and its performance evaluation in the fabrication of Al-Al2O3 samples [Volume 6, Issue 3, 2019, Pages 8-19]
-
Ghasemi, Amir Hossein
The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
-
Ghorashi, Seyed Ali
Finite element analysis of vibro-thermography nondestructive testing technique via local defect resonance [Volume 6, Issue 7, 2019, Pages 24-33]
-
Ghorbani, Mohammad
Investigating the effect of sculptured surface curvatures on milling forces [Volume 6, Issue 6, 2019, Pages 34-43]
-
Givi, Mohammad
The effect of friction stir vibration processing on microstructure and mechanical properties of Al5052/SiC surface nano composite [Volume 6, Issue 1, 2019, Pages 1-11]
-
Golzar, Mohammad
Experimental evaluation of joint strength in polypropylene-glass fiber reinforced composites under tensile load [Volume 6, Issue 2, 2019, Pages 39-46]
H
-
Hadad, Mohammad Jafar
Experimental Study on surface roughness and quality of Hybrid MQL and Thermally-Enhanced Turning of Stainless Steel 17-4 PH (AISI 630) [Volume 6, Issue 8, 2020, Pages 21-32]
-
Hajighorbani, Ramezanali
Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming [Volume 6, Issue 8, 2020, Pages 10-20]
-
Hamid Gorji, Hamidi
Experimental investigation of formability of laser tailor welded steel blanks in single point incremental forming [Volume 6, Issue 6, 2019, Pages 25-33]
-
Hamzeloo, Seyed Reza
Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]
-
Hashemi, Seyed Jalal
Experimental investigation of explosive forming of aluminum tubes using gas mixture [Volume 6, Issue 5, 2019, Pages 18-24]
-
Hassan Beygi, Sayed Reza
Nondestructive investigating firmness of tuber agricultural products during storage using sound and compression tests [Volume 6, Issue 7, 2019, Pages 52-60]
-
Heidari, Mehdi
An experimental and numerical study of tool geometry effect on microfracture characteristics in micro/nano machining of brittle porous structure [Volume 6, Issue 5, 2019, Pages 47-52]
-
Hemmati, Seyed Jalal
Design and build an active stereo scanner and validation of results from a metrological viewpoint [Volume 6, Issue 2, 2019, Pages 20-29]
-
Honarvar, Farhang
Finite element analysis of vibro-thermography nondestructive testing technique via local defect resonance [Volume 6, Issue 7, 2019, Pages 24-33]
-
Hosein mirzaee, Reza
A Solenoid Actuated Gecko-like Robotic Gripper [Volume 6, Issue 3, 2019, Pages 43-50]
-
Hosseini, Motahare
Optimization of Physical-Mechanical Properties of light cure Resins for use in 3D printing by micro and nano additives for industrial applications [Volume 6, Issue 8, 2020, Pages 33-42]
-
Hosseini Abbandanak, Seyyed Navid
Investigation the interface and charpy impact behavior of fiber metal laminates containing graphene nanoplatelets and glass kevlar hybrid fibers [Volume 6, Issue 2, 2019, Pages 10-19]
-
Hosseizadeh, Morteza
Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper [Volume 6, Issue 1, 2019, Pages 32-41]
I
-
Imani, Lila
Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]
J
-
Jalili, Mohammad Mahdi
Investigation of tool and workpiece clamping effect on stability lobes in milling process [Volume 6, Issue 6, 2019, Pages 12-24]
-
Jalili, Mohammad Mahdi
Simulation and modeling of dental bur force and vibration at enamel and dentin layers [Volume 6, Issue 8, 2020, Pages 43-53]
K
-
Kahhal, Parviz
Experimental study of mechanical properties and morphology of parts made by lost foam casting for A356-Alloy [Volume 6, Issue 1, 2019, Pages 42-52]
-
Karimi Ivanaki, Mohammad
Investigation the effect of bobbin tool geometry in friction stir welding of aluminum alloy 6061-T6 [Volume 6, Issue 4, 2019, Pages 1-6]
-
Karkeabadi, Mohammad
Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming [Volume 6, Issue 8, 2020, Pages 10-20]
-
Kashfi, Mohammad
Experimental study of mechanical properties and morphology of parts made by lost foam casting for A356-Alloy [Volume 6, Issue 1, 2019, Pages 42-52]
-
Kazemi Nasrabadi, Mohammad
Experimental Study on surface roughness and quality of Hybrid MQL and Thermally-Enhanced Turning of Stainless Steel 17-4 PH (AISI 630) [Volume 6, Issue 8, 2020, Pages 21-32]
-
Khalili, Khalil
Experimental and Numerical Study of Double Y-Shaped Hydroforming Using Analysis of Variance Method [Volume 6, Issue 7, 2019, Pages 34-41]
-
Khanzadeh Gharahshiran, MohammadReza
Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating [Volume 6, Issue 1, 2019, Pages 12-23]
-
KhanzadehGharahshiran, Mohammadreza
Study of the effect of instrument pin geometry on mechanical and microstructural properties of the welding region in the process of friction stir butt welding of AlMg6 [Volume 6, Issue 9, 2020, Pages 25-36]
-
Khoran, Mohammad
Investigation of machining behavior of Polyether Ether Ketone in Single grit scratch test [Volume 6, Issue 9, 2020, Pages 54-62]
-
Kouchaki, Mohammad
Controlling the warpage of plastic parts in injection molding process using the variation in coolant temperature of core and cavity [Volume 6, Issue 5, 2019, Pages 39-46]
L
-
Liaghat, Gholamhossein
Experimental and numerical investigation on crushing of metal-composite hybrid energy absorber under a quasi-static loading [Volume 6, Issue 8, 2020, Pages 54-66]
M
-
Mahmoodi, Masoud
Investigating the Effective Parameters in the Spring Back of Two Layers Sheet Copper-Austenitic Stainless Steel in the Incremental Sheet Forming [Volume 6, Issue 8, 2020, Pages 10-20]
-
Mazidi, Abbas
Simulation and modeling of dental bur force and vibration at enamel and dentin layers [Volume 6, Issue 8, 2020, Pages 43-53]
-
Meshkabadi, Ramin
Experimental and numerical investigation of the effect of metal powder particle size on the physical and mechanical properties of the components produced by high rate dynamic powder compaction [Volume 6, Issue 9, 2020, Pages 45-53]
-
Mirnia, Mohammad Javad
Experimental investigation of formability of laser tailor welded steel blanks in single point incremental forming [Volume 6, Issue 6, 2019, Pages 25-33]
-
Mirzaahmadi, Soheil
Investigating the effect of material properties on simulation of Mg alloy resistance spot welding process [Volume 6, Issue 1, 2019, Pages 53-60]
-
Moaref, Ali
Evaluation of the effect of underwater friction stir welding on microstructure and tribological properties of copper and its alloy [Volume 6, Issue 7, 2019, Pages 42-51]
-
Modabberifar, Mehdi
A Solenoid Actuated Gecko-like Robotic Gripper [Volume 6, Issue 3, 2019, Pages 43-50]
-
Moetakef-Imani, Behnam
Dynamic modeling of an internal turning tool using experimental modal analysis and simulation of active vibration control [Volume 6, Issue 4, 2019, Pages 29-36]
-
Moetakef-Imani, Behnam
Measurement and Modeling of Rotary Table geometric errors in CNC 4-axis Machine Tool [Volume 6, Issue 7, 2019, Pages 1-11]
-
Moghadasi, Amir Hossein
Experimental Study on surface roughness and quality of Hybrid MQL and Thermally-Enhanced Turning of Stainless Steel 17-4 PH (AISI 630) [Volume 6, Issue 8, 2020, Pages 21-32]
-
Mohammad, Javad Mirnia
The effect of surface shape on the production of aluminum-copper two layer tubes using forward extusion process [Volume 6, Issue 8, 2020, Pages 1-9]
-
Mohammadkhani Haji Khajehloo, Behzad
Experimental and numerical investigation of the effect of metal powder particle size on the physical and mechanical properties of the components produced by high rate dynamic powder compaction [Volume 6, Issue 9, 2020, Pages 45-53]
-
Mokhtari, Ali
Simulation and modeling of dental bur force and vibration at enamel and dentin layers [Volume 6, Issue 8, 2020, Pages 43-53]
-
Mostafa, Varmazyar
Design and construction of laser thickness measurement device and analysis the effect of variation of the scanning depth of field and ambient light intensity on the accuracy of point cloud [Volume 6, Issue 9, 2020, Pages 37-44]
-
Movahhedy, Mohammad Reza
Investigating the effect of sculptured surface curvatures on milling forces [Volume 6, Issue 6, 2019, Pages 34-43]
N
-
Naeemi amini, Pooria
Dynamic modeling of an internal turning tool using experimental modal analysis and simulation of active vibration control [Volume 6, Issue 4, 2019, Pages 29-36]
-
Niknejad, Abbas
Experimental study on the indentation resistance of water pipelines repaired by polyester resins [Volume 6, Issue 6, 2019, Pages 1-11]
-
Nowruzi Daeni, Hamid
Measurement and Modeling of Rotary Table geometric errors in CNC 4-axis Machine Tool [Volume 6, Issue 7, 2019, Pages 1-11]
P
-
Panahi liavoli, Rohallah
Experimental investigation of formability of laser tailor welded steel blanks in single point incremental forming [Volume 6, Issue 6, 2019, Pages 25-33]
-
Parvaz, Hadi
Theoretical and numerical investigation of workpiece jamming in fixture using block and palm case study [Volume 6, Issue 3, 2019, Pages 20-27]
R
-
Rabiezadeh, Amin
Evaluation of the effect of underwater friction stir welding on microstructure and tribological properties of copper and its alloy [Volume 6, Issue 7, 2019, Pages 42-51]
-
Rahmani Hanzaki, Ali
Modeling and optimization of cutting force and surface roughness in the milling process of Inconel 738 by Neural Network and Genetic Algorithm [Volume 6, Issue 5, 2019, Pages 25-38]
-
Rahmati, Sadegh
Analytical investigation of unbounded clad sheets by utilizing slab method and employing hybrid friction through asymmetrical rolling [Volume 6, Issue 3, 2019, Pages 51-64]
-
Refahi Oskuei, Amir
Design and construction of laser thickness measurement device and analysis the effect of variation of the scanning depth of field and ambient light intensity on the accuracy of point cloud [Volume 6, Issue 9, 2020, Pages 37-44]
-
Rezaei Ashtiani, Hamidreza
Fabrication of two layer Al/Cu rods using hot forward extrusion [Volume 6, Issue 4, 2019, Pages 7-13]
-
Riyahi, Fatemeh
Simulation and modeling of dental bur force and vibration at enamel and dentin layers [Volume 6, Issue 8, 2020, Pages 43-53]
-
Rohollah, Jamaati
The effect of surface shape on the production of aluminum-copper two layer tubes using forward extusion process [Volume 6, Issue 8, 2020, Pages 1-9]
S
-
Saadat, Abbas
Effect of Titanium Element on Microstructure and Mechanical Properties of Fe-Ni-C-W powder hardfacing coating [Volume 6, Issue 1, 2019, Pages 12-23]
-
Sadeh, Amrollah
Experimental investigation of explosive forming of aluminum tubes using gas mixture [Volume 6, Issue 5, 2019, Pages 18-24]
-
Safari, Mohammad Rassol
Investigation of tool and workpiece clamping effect on stability lobes in milling process [Volume 6, Issue 6, 2019, Pages 12-24]
-
Saidi, Amin
Process planning of cylindrical parts via by variant and generative methods and using of STEP file features [Volume 6, Issue 9, 2020, Pages 1-12]
-
Salimiasl, Aydin
Process planning of cylindrical parts via by variant and generative methods and using of STEP file features [Volume 6, Issue 9, 2020, Pages 1-12]
-
Sedighi, M.
Experimental study of the effect of temperature on mechanical properties of aluminum sheets produced by equal channel angular rolling process [Volume 6, Issue 9, 2020, Pages 13-24]
-
Seidi, Hassan
Investigation the effect of bobbin tool geometry in friction stir welding of aluminum alloy 6061-T6 [Volume 6, Issue 4, 2019, Pages 1-6]
-
Seifoori, Sajjad
Study of damage in CFRP and GFRP composite in drilling [Volume 6, Issue 6, 2019, Pages 44-50]
-
Seyedkashi, S. M. Hossein
Experimental and Numerical Study of Double Y-Shaped Hydroforming Using Analysis of Variance Method [Volume 6, Issue 7, 2019, Pages 34-41]
-
Shafeie, Mohammaad reza
Experimental Investigation of the Effect of Equal Channel Angular Pressing Intermediate Canal of on the Mechanical Properties of Copper [Volume 6, Issue 1, 2019, Pages 32-41]
-
Shakouri, Ehsan
Investigation and effect of number of recycling steps on molten flow rate and crystalline percent in injection process in wood-plastic composite [Volume 6, Issue 3, 2019, Pages 1-7]
-
Shalvandi, Maghohd
Application of pre-heating in the reduction of distortion in the dissimilar joints welding SS type 304 and carbon steel A106-B [Volume 6, Issue 6, 2019, Pages 51-63]
-
Shalvandi, Maghsoud
Process planning of cylindrical parts via by variant and generative methods and using of STEP file features [Volume 6, Issue 9, 2020, Pages 1-12]
T
-
Tabatabaeipour, Morteza
Finite element analysis of vibro-thermography nondestructive testing technique via local defect resonance [Volume 6, Issue 7, 2019, Pages 24-33]
-
Tajyar, Ali
Investigating the effect of different parameters on the occurrence of collapse defect in re-shape rolling of circular pipe into a square tube [Volume 6, Issue 4, 2019, Pages 14-22]
-
Tayyebati, mehdi
Experimental and numerical investigation on crushing of metal-composite hybrid energy absorber under a quasi-static loading [Volume 6, Issue 8, 2020, Pages 54-66]
Y
-
Yan, Jiwang
An experimental and numerical study of tool geometry effect on microfracture characteristics in micro/nano machining of brittle porous structure [Volume 6, Issue 5, 2019, Pages 47-52]
-
Yousefzadeh, Shahrouz
Experimental study of mechanical properties and morphology of parts made by lost foam casting for A356-Alloy [Volume 6, Issue 1, 2019, Pages 42-52]
Z
-
Ziaee, Sima
Experimental study on the indentation resistance of water pipelines repaired by polyester resins [Volume 6, Issue 6, 2019, Pages 1-11]
Your query does not match with any item